Cost saving: no manual battery swapping
Cost saving: cost 30% less than Lithium polymer batteries
Weigh less than Lipo- greater cargo capacity
Energy: More energy dense than Lipo batteries
Sustainability: fully recyclable battery technology
Safer than Lipo batteries
Risk: leased RangeStations® offload risk to Dronoco
Universal: can accommodate ALL UAV's
Market: 9.1B packages delivered annually in the US
Targets: e-tailers, retailers, express delivery/couriers, logistics Co.'s
Market: 1.1M mandatory inspections annually in the US
Targets: Utility Co.'s, Infrastructure management Co.'s, Municipalities
Market: 662 US Military Bases
Targets: Several specialized applications
Market: 2.2M farms
Targets: High value crop farms, livestock farms
Measuring roughly the size of an king sized bed, a RangeStation® is the robotic system that autonomously exchanges spent battery packs from a recently landed UAV, with freshly charged packs from charging bays within the RangeStation®. In other words it's a battery vending machine, almost exactly like a common soft drink vending machine. The battery exchange process takes approximately 90 seconds from the time an aircraft lands, until the UAV is "cleared" for departure. Depleted batteries from aircraft are charged in the charging array of the RangeStations®.
When several RangeStations® are deployed in a city, they form a RangeStation® network. Multiple UAV's can fly from one RangeStation® to the closest neighboring RangeStation®, and at each point getting a fresh set of batteries. This enables almost unlimited range, indefinite flight time, and no costly human interaction with the UAV. RangeStations® will typically be deployed on roof tops of buildings, and revenue sharing agreements can be formalized with a property owner on which the RangeStation® is located.
A Jump Pack is a collective term for one Dronoco Universal Landing Gear assembly and two battery packs.
The landing gear assembly is the universal hardware that attaches to the underbelly of almost any battery powered multi rotor UAV. This specialized hardware retains two of our battery packs in each "skid" of the landing gear in a battery pack "receiver".
Every landing gear assembly is dimensionally standardized. Because of this standardization, the RangeStation® vending robotics know exactly where the battery packs are located on UAV’s, and can extract and replace battery packs on any aircraft that has is fitted with our universal landing gear hardware.
Identification of each aircraft on our system is an important security consideration. It will also become an FAA requirement in the near future. For this reason each Dronoco landing gear has a unique RFID tag built into it specifically to identify each aircraft that lands on a RangeStation®. A database of these tags is maintained by our servers. This is not the “tail number” of the aircraft issued by the FAA, however, the two can and will be linked on our servers during the client registration process.
Each Battery pack is dimensionally standardized. This allows seamless interaction with our landing gear and our RangeStation® robotics, regardless of the make of aircraft being refueled. Each battery pack houses 24 X 18650 lithium ion cylindrical cells batteries (22.2V). The hobbyist UAV community has not broadly adopted these cells since their charging time is significantly longer than lithium polymer ion batteries. They are also not favored by hobbyists because of their lower "C" rating or discharge capacity. However, these 18650 cylindrical cells are used exclusively in the overwhelming majority of eBikes, laptops and electric motor vehicles. Tesla Motors uses them exclusively to power all of their vehicles. 18650 cylindrical lithium ion battery technology is preferred by industry because they are the most energy dense batteries in the world for their weight (gravimetric energy density). These cells can be charged and discharged about 300 times before they no longer hold an optimum charge, after which the batteries in the pack must be discarded (and recycled), and fresh packs re-introduced into the RangeStations® battery charging array. Our custom battery pack enclosures can be opened, and reused when replacement batteries are needed. Besides the 18650 cells, each battery pack also contains a small Radio Frequency Identification (RFID) tag. The RFID tag is automatically scanned by a reader in the RangeStation® after extraction from an aircraft’s landing gear. This allows us to build a health history of each battery pack, and predict imminent failures.
In the near future, the FAA will require a minimum of two batteries on all commercial UAV’s.
We offer various development and integration services:
• custom landing gear design
• custom pilot projects
• aircraft payload matching
• software integration
When planning the location for a RangeStations® deployment, many time consuming tasks need to be fulfilled. The site needs to be inspected for aerial obstacles, the zoning of the target property needs to be ascertained, the owner of the property will need to be contacted, several agreements need to be drawn up, an offer needs to be made, business licenses need to be acquired, the fire department needs to evaluate the site etc. We offer the optional convenience of all the above.
Dronoco offers rapid and hassle free deployment/installation services anywhere in the world.
We offer binding Service Level Agreements to high volume clients, clients that require 100% uptime of their RangeStations® networks which may include replacement RangeStation® on standby.